Containers

Open Top Roll-off Containers

  • SIZES: 10yd3, 20yd3, 30yd3 & 40yd3 sizes
  • IDEAL USES: Construction Sites, Industrial Facilities, Cleanup projects, Concrete, Brick, Dirt
  • Open Top access for fast easy loading by hand or equipment
  • Convenient rear door loading access for loading heavy material by hand

Open Top Roll-Off Containers for any construction site, warehouse, industrial facility, or commercial location. These workhorses of the waste industry are engineered to be ideally suited for storing and hauling large amounts of debris from a wide variety of waste streams. Their rugged and sturdy construction is why they serve a crucial role in so many industrial applications.

The special tub style design with its smooth tapered sides provides for easier unloading of certain types of material. Additional options can be added for specific requirements. Extra heavy-duty models are also available for construction and demolition applications as well as heavy scrap metal hauling.

  • 7 Gauge Floor…12 Gauge Sides
  • 3 1/8″ X 5 1/2″ Side Braces on 36″ Centers (approx.)
  • 6″ X 2″ X 1/4″ Rectangular Tube Long Sills
  • 4″ X 3″ X 1/8″ Tube Top Cap
  • 3″ Structural Channel Cross Members on 16″ Centers.
  • Cross Members are Gusseted & Welded to the Long Sill
  • 6 5/8″ O.D. Rear Rollers (Except Bale Style)
  • 1 1/4″ X 1/4″ Tarp Rail
  • Solid Steel Nose Cone on Front of the Long Sills to Reduce Impact Damage
  • Serial Number Welded to Container
  • Heavy Duty Rear Door Hinges with Grease Fittings
  • ANSI Approved Door Latch
  • Rear Door Safety Chain & Brackets
  • Rear Door Hinged Streetside
  • Rear Container Hold downs
  • Greaseable Wear Points
  • Outside Rail Understructure
  • Primed & Finish Painted

*Containers built for stock will have the following specs:

  • 6″ X 2″ X 3/16 Long Sills
  • 3″ X 2″ X 11 Gauge Uprights
  • Crossmembers are on 20″ Centers
  • 14 Gauge Side Stakes, Formed
  • 1/4″ Floor…7 Gauge Sides
  • 6″ X 2″ X 3/8″ Extra Heavy Duty Long Sills
  • 4″ X 3″ X 1/4″ Rectangular Tube Top Cap
  • Inverted Angle on Top Cap
  • 10 Gauge & 12 Gauge Roofs
  • 6 5/8″ or 10 3/4″ O.D. X 8″ Front Rollers
  • 10 3/4″ X 10″ Rear Rollers (Except Bale Style)
  • Interior Gussets
  • Dirt Shedders
  • Horizontal Side Braces
  • Barn Doors
  • Deadlift, Bale, and Hooklift Style Understructures
  • Rear Door Hinged Curbside

Roll Tarp and Metal Roll Lid Containers

  • SIZES: 20yd3, 25yd3 & 30yd3 sizes
  • IDEAL USES: Environmental Soil Clean-up, Tank Cleaning Projects, etc.
  • Standard water-tight roll off container with metal roll lid or heavy duty roll tarp cover
  • Open top access, splash guards, rear door binders/ratchets, and gasketed door

Roll-off Sludge Containers are also known as: Roll-off, Sludge container, Sealed-gate Roll-off, Sealed-gate Sludge box, Vapor-tight Roll-off, Haz box, Haz container, Haz roll-off, Haz roll-off box.

They are designed for collecting, storing, and transporting a wide variety of sludge waste or liquid waste products and can accommodate most roll-off hoist systems. Various lengths and capacities are offered to solve numerous waste handling applications. Features include splash guards, metal lid and/or roll tarp covers, and open top access. Four wheel maneuverability. Fully compression sealed with door gasket and rear door binders. Typically used with disposable liners.

Dewatering ROL Containers

  • SIZES: 25yd3 sizes
  • IDEAL USES: Separating liquids from solids in waste streams. Sparging and/or vacuum capability is included beneath the filter packs
  • Equipped with filter baskets and disposable filter cloth to enhance efficiency
  • Easy cleanout of liquids and solids with front washout ports and rear drains

Dewatering ROL Containers are also known as Phase separators, De-watering containers, De-watering boxes, Dewatering roll-offs, or Haz Dewatering boxes.

These containers provide a one-step method for separating and dewatering sludge, slurries and waste streams. De-watering boxes are frequently a 25-yard capacity roll-off container equipped with steel mesh screens to facilitate dewatering of sludge, clarification of liquids and phase separation of various compounds. The material can be pumped or conveyed by other means into the roll-off container filter for liquid / solid separation. Liquid drains through the installed filter media panels and out of the container via discharge ports. A variety of filters can also be used in specific applications.

  • Dewatering sludge
  • Meeting federal and state regulations for land fill disposal
  • Recovering the material as a product
  • Clarifying the aqueous phase
  • Dewatering grit and screenings at sewage treatment plants
  • Dewatering fly ash at power plants
  • Dewatering clarifier bottoms at water/waste water treatment plants
  • Dewatering lagoon sludge
  • Remove solids from storm water runoff

Vacuum ROL Containers

  • SIZES: 20yd3 & 25yd3 sizes
  • IDEAL USES: Storing and/or transporting liquid, solid, or sludge waste
  • Excellent for enabling continuous operation of vacuum trucks or air movers.
  • Access is 21” to 24” top sealed man-way with ladder access on container side

Vacuum ROL Containers are also knows as Vacuum boxes, Vacuum container, Vacuum Roll-off, Vac, Roll-off. Sometimes referred to as a Baker Box, Rain-for-Rent Box, Baker Vac, Rain-for-Rent Vac.

AWE offers vacuum sludge containers that feature a side hinge rear door that is fully sealed to prevent leakage. Often used in conjunction with a vacuum truck, our vacuum sludge containers are engineered to withstand the pull of a truck’s vacuum.

These containers can be used to shuttle sludge or solid wastes directly to a disposal site. They are designed to keep a vacuum truck or other air mover operating full time.

FRAC Tank Containers with Fixed Axle

  • SIZES: 450 to 550 BBL (18,900 to 21,000 gallons)
  • IDEAL USES: On-site storage of liquid wastes for various applications and projects
  • Designed for easy cleanout with “V” and round floors, sloped for 100% drain out
  • ¼” ASTM A36 carbon steel construction with chemical resistant coating

FRAC Tank containers are also known as a Mobile Storage Tank, Portable Tank, Baker Tank, Rain-for-Rent Tank, Rhino Tank.

Our environmental FRAC tanks are ideal for on-site storage of liquid waste. A variety of models and sizes are available to meet various requirements. We can also custom engineer a FRAC tank to serve customers’ individualized needs.

“V” bottom and round bottom floor designs for easy cleanout. Tanks can be manifolded together for large projects. Sloped bottom enabling easier cleaning and 100% drain out.

Tank Trailers

  • SIZES: 7,000 gallons
  • IDEAL USES: Storage, transportation, and distribution of liquid product or liquid waste streams
  • Reduces cross contamination in addition to reducing cleaning costs and product transfer costs

AWE’s Stainless-Steel Tank Trailers are perfect for storing highly refined materials.  Our Tank Trailers offer 7,000 gallons of mobile storage capacity that is easy to clean and corrosion resistant.  These tanks offer the utmost degree of protection from contamination.

Roadworthy and reliable, AWE’s Tank Trailers are DOT approved for interim storage and transfer.

  • 7,000 gallon capacity
  • 316L stainless steel shell, insulated
  • Multiple variations for specific applications
  • Some models available with vapor recovery
  • 304 stainless steel spill-dam around manhole